Call 08048617551 69% Response Rate

Send Email

Fume Hood

Pioneers in the industry, we offer chemical fume hood, walk in fume hood, laboratory fume extractor, lab fume hood, top laboratory fume hood and ms laboratory fume extractor from India.
Chemical Fume Hood
  • Chemical Fume Hood
  • Chemical Fume Hood
  • Chemical Fume Hood
  • Chemical Fume Hood

Chemical Fume Hood

Product Price: Rs 1.45 Lakh / UnitGet Best Price

Product Brochure

Product Details:
MaterialMild Steel
Country of OriginMade in India
Air Volume1750 m3/h
Dimension1800 x 940x 2250 mm
Usage/ApplicationLaboratory
Surface TreatmentPaint Coated

Fume Hood Acid Storage Cabinets:

  • Acid storage fume hood cabinets shall utilize the same thickness of steel and construction features as other base cabinets except they shall be completely lined with a Polyethylene corrosion resistant liner. The liner shall be 5mm thick, Each door shall have a set of louvers at the top and bottom, and have a 3mm sheet polyethylene liner. Where specified, each cabinet shall be vented into the fume hood with a 40mm vent pipe. It should provide a positive airflow directly into the fume hood exhaust system. Where specified or shown on drawings, epoxy coated wire shelf supported by integral brackets shall be built into the Polyethylene liner.
Get Best QuoteRequest A Callback
Walk In Fume Hood
  • Walk In Fume Hood
  • Walk In Fume Hood

Walk In Fume Hood

Product Price: Rs 1.7 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Air Velocity0.8 m/s
UsageChemical Laboratory
DimensionApprox. 1200 x 800 x 2350 mm
Country of OriginMade in India
Body MaterialMild Steel
Min. Temperature-30 Degree C
Max. Temperature50 Degree C

Fume hood super structure should consist of:

  • Frame structure in atleast 1.6 mm thick galvanized iron construction.
  • Inner lining, rear baffles and top baffles in 6mm thick fire retardant property lab grade Phenolic resin construction of any reputed make.
  • Outer panels of the super structure should be in atleast 1.2mm thick high finished GI construction, duly coated with epoxy powder.
  • Front post should be broad enough to mount service fittings and should be in fabricated out of atleast
  • 1.2 mm thick high finished GI construction, duly coated with epoxy powder.
  • Air Foil should be in Flip-on type design and should be fabricated out of 1.6 mm thick SS 316 construction. Air foil should be with hard teflon coating for extra ordinary chemical resistant.
  • Exhaust outlet should be provided with streamlined shaped duct collar in PP construction.
  • The front sash should be in Combination type design, 5 mm thick toughened glass construction with full length sash handle in anodized Al construction duly coated with epoxy powder.
  • Sash movement mechanism should be provided with multi core SS wire having dia. not less than 3.0 mm. The wire pulleys should be provided with ball bearings in SS construction for smooth movement of the sash.
  • Super structure should be provided with LED lights of sufficient capacity for proper illumination within the hood chamber. The light intensity at work top level should be at least 300 lux.
Get Best QuoteRequest A Callback
Laboratory Fume Extractor
  • Laboratory Fume Extractor
  • Laboratory Fume Extractor
  • Laboratory Fume Extractor
  • Laboratory Fume Extractor
  • Laboratory Fume Extractor
  • Laboratory Fume Extractor
  • Laboratory Fume Extractor

Laboratory Fume Extractor

Product Price: Rs 15,500 / PieceGet Best Price

Product Brochure

Product Details:
MaterialPp
Automation GradeSemi Automatic
Internal Diameter97 mm
Outer Diameter102 mm
ApplicationLaboratory
Length1500 mm
Width75 mm

We are offering Laboratory Fume Extractor to our clients.

Get Best QuoteRequest A Callback
Lab Fume Hood
  • Lab Fume Hood
  • Lab Fume Hood

Lab Fume Hood

Product Price: Rs 1.2 Lakh / PieceGet Best Price

Product Brochure

Product Details:
Weight250 Kg
Width800 mm
Height2350 mm
Country of OriginMade in India
Opening Height75 mm
Length1500 mm
UsageLab
Our organization offers a wide collection of Lab Fume Hood that is exclusively manufactured by industry experts using high-quality raw material that is procured from trusted vendors.

Weight:
  • 200 - 250 Kg
Get Best QuoteRequest A Callback
Top Laboratory Fume Hood
  • Top Laboratory Fume Hood
  • Top Laboratory Fume Hood

Top Laboratory Fume Hood

Product Price: Rs 1.62 Lakh / UnitGet Best Price

Product Brochure

Product Details:
Usage/ApplicationLaboratory
Frequency50 Hz
Country of OriginMade in India
External Size1800 x 940 x 2150 mm
Internal Size1600 x 670 x 1250 mm
Voltage Supply220V
Body MaterialMild Steel

Fume hood super structure should consist of:

  • Frame structure in atleast 1.6 mm thick galvanized iron construction.
  • Inner lining, rear baffles and top baffles in 6mm thick fire retardant property lab grade Phenolic resin construction of any reputed make.
  • Outer panels of the super structure should be in atleast 1.2mm thick high finished GI construction, duly coated with epoxy powder.
  • Front post should be broad enough to mount service fittings and should be in fabricated out of atleast
  • 1.2 mm thick high finished GI construction, duly coated with epoxy powder.
  • Air Foil should be in Flip-on type design and should be fabricated out of 1.6 mm thick SS 316 construction. Air foil should be with hard teflon coating for extra ordinary chemical resistant.
  • Exhaust outlet should be provided with streamlined shaped duct collar in PP construction.
  • The front sash should be in Combination type design, 5 mm thick toughened glass construction with full length sash handle in anodized Al construction duly coated with epoxy powder.
  • Sash movement mechanism should be provided with multi core SS wire having dia. not less than 3.0 mm. The wire pulleys should be provided with ball bearings in SS construction for smooth movement of the sash.
  • Super structure should be provided with LED lights of sufficient capacity for proper illumination within the hood chamber. The light intensity at work top level should be at least 300 lux.
  • Fume hood work top in granite construction having thickness not less than 18 mm. The work top shall be provided with raised rails on all 4 sides to prevent spillage and should also be provided with a cup sink in PP construction on rear side corner.
  • All the service valves should be in forged brass construction with spindle in SS construction. Valves should be provide with angular shaped serrated nozzles also in brass construction with epoxy powder coating. The valve knobs should be with color sign as per DIN standard. All the valves should be provided with service pipe connection at least 1.5-meter-long in following construction.
Get Best QuoteRequest A Callback
MS Laboratory Fume Extractor

MS Laboratory Fume Extractor

Product Price: Rs 22,500 / PieceGet Best Price

Product Brochure

Product Details:
UsageIndustrial
TypePP
MaterialPP
Automation GradeSemi Automatic
ColorCustomized
Installation ServicesYes
90mm inner diameter for the top pipe. Joint: High grade PP, to be 360 degree swiveled, dismantled & assembled easily for cleaning; Joint seal ring: low-friction treated rubber; Support spring / center bolt: stainless steel. Adjustable joint knob: high grade PP with a molded in brass nut locking with center bolt; Dome/cup hood: D375mm, high grade PP. All in white color.
Get Best QuoteRequest A Callback
Distillation Fume Hood
  • Distillation Fume Hood
  • Distillation Fume Hood

Distillation Fume Hood

Product Price: Rs 1.9 Lakh / UnitGet Best Price

Product Brochure

Product Details:
MaterialMild Steel
Air Velocity0.8 m/s
UsageLaboratory
Gross Weight420 kg
Country of OriginMade in India
Height7 Feet
Length14 Feet
We are offering Distillation Fume Hood to our clients.
Get Best QuoteRequest A Callback
MS	Laboratory Hoods
  • MS	Laboratory Hoods
  • MS	Laboratory Hoods

MS Laboratory Hoods

Product Price: Rs 1.45 Lakh / PieceGet Best Price

Product Brochure

A laboratory fume hood is a workspace designated for containment of perilous reagents used in experiments or assays, or toxic fumes that result from reactions or experiments. Found in all types of labs, the primary goal of the hood is to protect the user from these reagents, and to protect other laboratory staff, animals and/or experiments from contamination. Air is pulled away from the user and filtered or released to the external environment. Fume hoods are found in a variety of shapes and sizes- small bench top units are available for space challenged labs, and larger cabinet-type units are available for storage and space demanding experiments. Application will determine the type of fume hood needed, for example specially designed units are designed to protect users from radioisotopes, and units with a wash-down system of water spray nozzles dispersed throughout the hood are required for work with perchloric acid. When choosing a proper hood for your lab, consider special application requirements, energy consumption, available space and types of filters needed.
Get Best QuoteRequest A Callback
FRP Fume Hood
  • FRP Fume Hood
  • FRP Fume Hood
  • FRP Fume Hood
  • FRP Fume Hood
  • FRP Fume Hood

FRP Fume Hood

Product Price: Rs 1.65 Lakh / PieceGet Best Price

Product Brochure

Product Details:
Country of OriginMade in India
MaterialFRP
Voltage240V
PhaseSingle Phase
Power SourceElectric
Frequency50 Hz
HeightApprox. 6 Feet
We are offering FRP Fume Hood to our clients.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "Fume Hood"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

3.3/5

★★★★★★★★★★

Reviewed by 4 Users

  • 5★0
  • 4★3
  • 3★0
  • 2★0
  • 1★1
  • User Satisfaction
  • Response100%

Most Relevant Reviews

H
★★★★★★★★★★
27-January-22
Himansu
Vadodara, Gujarat
Response
D
★★★★★★★★★★
26-November-20
Dr Assainar
Sulthan Bathery, Kerala
Response
Y
★★★★★★★★★★
05-May-20
Youssef
Libya
Product Name : Laboratory Furniture
Response

© Lab Care Furniture. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.