Laboratory Bench

Click to Zoom

• 
• 
• 
• +9

Get Best Quote

Approx. Rs 2,200 / Square Feet Get Latest Price

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest

2016 Guidelines published by SEFA.

All modular construction & design must be made of mainly skin passed/zero spangle G.I. (Galvanized Iron) sheet duly coated with at least 50-60-micron Epoxy Powder Coated in panel form and in CKD (Completely Knocked Down) construction. The design should have provision for reconfiguration for change in layout using simple tooling and should provide independent access to the utilities installed, electrical panel & instrumentation panel. It should be removable without removing other panels.

All GI sheet components are of superior brand like TATA Steel / Jindal and are fabricated by precision shearing, levelling, and notching, piercing, machines to achieve consolidated dimensions within close tolerances under the strict quality checks and assembled with the aid of fixtures. Exposed welding marks should be polished smooth to improve aesthetic. Corner intersections of vertical and horizontal members should in the same plane with bolted joints and should be suitably aligned.

Laboratory Work Stations are available in 2 heights of 900mm (Standing purpose) and 750mm (Sitting purpose) in metallic construction designed to have completely flexible modular system. Necessary leg space is provided between two modules wherever required. Rear portion of the leg space are covered with the openable enclosure panel. Work table should consist of;

Click to Zoom

Get Best Quote

Approx. Rs 75,000 / Unit Get Latest Price

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest

2016 Guidelines published by SEFA.

All modular construction & design must be made of mainly skin passed/zero spangle G.I. (Galvanized Iron) sheet duly coated with at least 50-60-micron Epoxy Powder Coated in panel form and in CKD (Completely Knocked Down) construction. The design should have provision for reconfiguration for change in layout using simple tooling and should provide independent access to the utilities installed, electrical panel & instrumentation panel. It should be removable without removing other panels.

All GI sheet components are of superior brand like TATA Steel / Jindal and are fabricated by precision shearing, levelling, and notching, piercing, machines to achieve consolidated dimensions within close tolerances under the strict quality checks and assembled with the aid of fixtures. Exposed welding marks should be polished smooth to improve aesthetic. Corner intersections of vertical and horizontal members should in the same plane with bolted joints and should be suitably aligned.

Laboratory Work Stations are available in 2 heights of 900mm (Standing purpose) and 750mm (Sitting purpose) in metallic construction designed to have completely flexible modular system. Necessary leg space is provided between two modules wherever required. Rear portion of the leg space are covered with the openable enclosure panel. Work table should consist of;

Click to Zoom

Get Best Quote

Approx. Rs 50,000 / Unit Get Latest Price

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest

2016 Guidelines published by SEFA.

All modular construction & design must be made of mainly skin passed/zero spangle G.I. (Galvanized Iron) sheet duly coated with at least 50-60-micron Epoxy Powder Coated in panel form and in CKD (Completely Knocked Down) construction. The design should have provision for reconfiguration for change in layout using simple tooling and should provide independent access to the utilities installed, electrical panel & instrumentation panel. It should be removable without removing other panels.

All GI sheet components are of superior brand like TATA Steel / Jindal and are fabricated by precision shearing, levelling, and notching, piercing, machines to achieve consolidated dimensions within close tolerances under the strict quality checks and assembled with the aid of fixtures. Exposed welding marks should be polished smooth to improve aesthetic. Corner intersections of vertical and horizontal members should in the same plane with bolted joints and should be suitably aligned.

Laboratory Work Stations are available in 2 heights of 900mm (Standing purpose) and 750mm (Sitting purpose) in metallic construction designed to have completely flexible modular system. Necessary leg space is provided between two modules wherever required. Rear portion of the leg space are covered with the openable enclosure panel. Work table should consist of;

Click to Zoom

• 
• 
• 
• +1

Get Best Quote

Approx. Rs 45,046 / Unit Get Latest Price

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest

2016 Guidelines published by SEFA.

All modular construction & design must be made of mainly skin passed/zero spangle G.I. (Galvanized Iron) sheet duly coated with at least 50-60-micron Epoxy Powder Coated in panel form and in CKD (Completely Knocked Down) construction. The design should have provision for reconfiguration for change in layout using simple tooling and should provide independent access to the utilities installed, electrical panel & instrumentation panel. It should be removable without removing other panels.

All GI sheet components are of superior brand like TATA Steel / Jindal and are fabricated by precision shearing, levelling, and notching, piercing, machines to achieve consolidated dimensions within close tolerances under the strict quality checks and assembled with the aid of fixtures. Exposed welding marks should be polished smooth to improve aesthetic. Corner intersections of vertical and horizontal members should in the same plane with bolted joints and should be suitably aligned.

Laboratory Work Stations are available in 2 heights of 900mm (Standing purpose) and 750mm (Sitting purpose) in metallic construction designed to have completely flexible modular system. Necessary leg space is provided between two modules wherever required. Rear portion of the leg space are covered with the openable enclosure panel. Work table should consist of;

Click to Zoom

• 
• 
• 
• +2

Get Best Quote

Approx. Rs 1 Lakh / Unit Get Latest Price

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest

2016 Guidelines published by SEFA.

All modular construction & design must be made of mainly skin passed/zero spangle G.I. (Galvanized Iron) sheet duly coated with at least 50-60-micron Epoxy Powder Coated in panel form and in CKD (Completely Knocked Down) construction. The design should have provision for reconfiguration for change in layout using simple tooling and should provide independent access to the utilities installed, electrical panel & instrumentation panel. It should be removable without removing other panels.

All GI sheet components are of superior brand like TATA Steel / Jindal and are fabricated by precision shearing, levelling, and notching, piercing, machines to achieve consolidated dimensions within close tolerances under the strict quality checks and assembled with the aid of fixtures. Exposed welding marks should be polished smooth to improve aesthetic. Corner intersections of vertical and horizontal members should in the same plane with bolted joints and should be suitably aligned.

Laboratory Work Stations are available in 2 heights of 900mm (Standing purpose) and 750mm (Sitting purpose) in metallic construction designed to have completely flexible modular system. Necessary leg space is provided between two modules wherever required. Rear portion of the leg space are covered with the openable enclosure panel. Work table should consist of;

Click to Zoom

Get Best Quote

Approx. Rs 45,056 / Piece Get Latest Price

Click to Zoom

Get Best Quote

Approx. Rs 1.08 Lakh / Piece Get Latest Price

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest

2016 Guidelines published by SEFA.

All modular construction & design must be made of mainly skin passed/zero spangle G.I. (Galvanized Iron) sheet duly coated with at least 50-60-micron Epoxy Powder Coated in panel form and in CKD (Completely Knocked Down) construction. The design should have provision for reconfiguration for change in layout using simple tooling and should provide independent access to the utilities installed, electrical panel & instrumentation panel. It should be removable without removing other panels.

All GI sheet components are of superior brand like TATA Steel / Jindal and are fabricated by precision shearing, levelling, and notching, piercing, machines to achieve consolidated dimensions within close tolerances under the strict quality checks and assembled with the aid of fixtures. Exposed welding marks should be polished smooth to improve aesthetic. Corner intersections of vertical and horizontal members should in the same plane with bolted joints and should be suitably aligned.

Laboratory Work Stations are available in 2 heights of 900mm (Standing purpose) and 750mm (Sitting purpose) in metallic construction designed to have completely flexible modular system. Necessary leg space is provided between two modules wherever required. Rear portion of the leg space are covered with the openable enclosure panel. Work table should consist of;

Click to Zoom

Get Best Quote

Approx. Rs 2.51 Lakh / Piece Get Latest Price

Laboratory metallic furniture must be tested as per SEFA standards in SEFA Approved labs with latest

2016 Guidelines published by SEFA.